Purchasing · minimum order quantities

When the supplier’s MOQ is more than you need: price the extra stock, then compare the options

Your forecast says 500 units. The supplier’s minimum order quantity says 2,000. Taking the minimum is not automatically wrong, and paying more to order less is not automatically right. This post shows how to turn the MOQ into months of cover, price the extra stock month by month, and set that cost against the other options you have. Every SKU, price and quote in the two worked examples is invented so the arithmetic can be checked.

The short version
  • Turn the MOQ into months of cover at your low, middle and high demand case. That tells you how long the extra stock will sit, and whether any of it outlives its shelf life.
  • Price the extra stock month by month. Compare what you would hold with the MOQ against what you would hold with your normal order size, and add up the carrying cost of the difference until both are sold.
  • Add what never sells. If the product expires, goes out of season or changes design before the MOQ sells through, the leftover units are a write-off, not a carrying cost.
  • Give every alternative its own cost line: a below-MOQ surcharge, a split across variants, staggered delivery, or not ordering yet.
  • The answer can change with the demand case. Pick the option whose bad outcome you can afford, not the one that wins only if the forecast is right.

A minimum order quantity is the supplier’s floor: the smallest run it will make at the quoted price, set by its own setup costs, material buys or carton counts. When your forecast sits above the floor, the MOQ is just a number on the quote. When it sits below, you are being asked to buy stock you did not plan for. The two quick answers are “negotiate it down” and “just take it”. Neither one says which is cheaper for this SKU. The arithmetic below does.

This is a different problem from economic order quantity, which finds the best order size when you are free to choose it, and from rounding to a case pack, which adds a few units. An MOQ can add months of stock.

Step 1 — Turn the MOQ into months of cover

Start with three demand cases for the SKU: low, middle and high. If the SKU has history, they come from its range of recent months. If it is new, they come from similar SKUs; the demand forecasting walk-through covers building them. Then divide the MOQ by each case:

months of cover = MOQ ÷ monthly demand

Do the same for the order you would place if there were no MOQ: the quantity your normal reorder cycle calls for. The gap between the two is the extra stock the MOQ makes you hold.

Worked example 1 (invented): a durable product, MOQ 2,000

A brand sells a canvas tote bag. Landed cost is $4.00 a unit (the landed cost is what matters here, not the factory price). It would normally order 500 units at a time. The supplier’s MOQ is 2,000.

CaseMonthly demand2,000 units lastA normal 500 lasts
Low12516 months (about 69 weeks)4 months
Middle2508 months (about 35 weeks)2 months
High5004 months (about 17 weeks)1 month

At the middle case the MOQ is four normal orders delivered at once. At the low case it is well over a year of stock. Whether that is a problem depends on what a month of holding costs, which is step 2.

Step 2 — Price the extra stock, month by month

The carrying cost of a unit is what it costs to hold it for a month: storage from your warehouse’s rate card, plus the cost of the cash tied up in it. The cost of cash is your own judgement: the rate on your credit line, or the return you give up by not spending the money elsewhere.

For the tote bag, take storage at $0.05 per unit per month and the cost of cash at 1% of the $4.00 unit cost per month, $0.04. That is $0.09 per unit per month.

Now compare, month by month, what you would hold in each case. Count units on hand at the start of each month. With the MOQ you start at 2,000 and sell down. With normal ordering you start at 500, sell down, and the next 500 arrives as the last ones sell. Safety stock is the same in both, so it drops out of the comparison. This assumes each normal order arrives just as the previous lot sells through. If your lead time forces orders to overlap, or you carry more cycle stock, model that real replenishment pattern instead: it puts more units in the normal-order column and shrinks the gap between the MOQ and the normal order. At the middle case:

MonthOn hand, MOQOn hand, normal ordersExtra units heldExtra cost this monthCumulative
12,0005001,500$135$135
21,7502501,500$135$270
31,5005001,000$90$360
41,2502501,000$90$450
51,000500500$45$495
6750250500$45$540
75005000$0$540
82502500$0$540

Taking the MOQ costs about $540 more in carrying cost than ordering 500 at a time, over the eight months it takes to sell. The cost is front-loaded: two thirds of it ($360 of $540) lands in the first three months, while the extra stock is largest.

Run the same table for the other two cases. Each one adds up the extra units held across the months (unit-months) and multiplies by $0.09:

CaseUnit-months, MOQUnit-months, normalExtra unit-monthsExtra carrying cost
Low (125 / month, 16 months)17,0005,00012,000$1,080
Middle (250 / month, 8 months)9,0003,0006,000$540
High (500 / month, 4 months)5,0002,0003,000$270

Counting units at the start of the month is a simplification. Counting the month’s average instead lowers both columns by the same amount, because both options sell the same units in the same months, so the extra figure does not move.

Then add what never sells

Carrying cost assumes every unit eventually sells. That fails for a product with a shelf life, a season, or a design that will be replaced. For those, find the month the stock stops being sellable and count what the MOQ still leaves on the shelf then, at each demand case. Those units are a write-off, or a clearance sale below cost. In example 2 below, the write-off at the middle case is about four times the carrying cost.

The tote bag is durable and its design is fixed, so the brand puts the write-off at zero. That is its judgement about this SKU. A different brand with a different product would put a number there.

Step 3 — Give every alternative its own cost line

The MOQ is one option. List the others, and price each one the same way.

  1. Take the MOQ. Cost: the extra carrying from step 2, plus any write-off. Cash: the whole order paid up front.
  2. Pay to order less. Ask for a quote below the MOQ. Suppliers that agree will charge a surcharge per order or a higher unit price. Cost: the premium on every unit you buy that way, plus the cost of placing more orders (freight minimums, receiving, admin) than the single MOQ order.
  3. Split the MOQ across variants. If several SKUs share a material, base or tooling, ask whether the MOQ can apply to the shared input: 2,000 units across three colours instead of 2,000 of one. Cost: the same carrying arithmetic, run on the combined demand, then checked for each variant.
  4. Commit to the MOQ, take it in stages. Ask whether the supplier will make the full run and ship it in instalments. Cost: the extra deliveries, plus any fee to hold the stock. Risk: you are still committed to the full quantity if sales fall. It depends on what your supplier agrees to, so get the terms in writing.
  5. Skip or delay the SKU. Cost: the margin on the sales you do not make. For an existing SKU, the question becomes whether it should be reordered at all.

Example 1 decided: take the MOQ

The supplier quotes 500 units at $4.80 instead of $4.00, a premium of $0.80 a unit (invented quote). Each extra order costs the brand $150 in freight minimum and receiving (invented). To buy the same 2,000 units, ordering 500 at a time means four orders instead of one.

OptionLow caseMiddle caseHigh case
Take the MOQ (extra carrying, no write-off)$1,080$540$270
Pay $0.80 more on 2,000 units, plus 3 extra orders at $150$2,050$2,050$2,050

The MOQ is cheaper in every case, by $970 even at the low one. The main constraint here is cash: the MOQ needs $8,000 up front against $2,400 per smaller order, and that money is tied up in stock that will sell, not lost. If the brand can fund the $8,000, the MOQ wins. If it cannot, the cash limit decides, whatever the arithmetic says.

Worked example 2 (invented): a product with a shelf life, MOQ 3,000

A brand sells a skincare product. Landed cost is $12.00 a unit, sellable for 12 months after delivery (invented; check the real figure on your own product). It would normally order 600 units at a time. The supplier’s MOQ is 3,000. Demand: 100 a month low, 150 middle, 300 high. Carrying cost: $0.05 storage plus 1% of $12.00, so $0.17 per unit per month.

At 3,000 units, the low case needs 30 months to sell through, the middle case 20 and the high case 10. Only the high case finishes inside the 12-month shelf life. So the comparison runs to month 12 for the low and middle cases, where the remaining stock expires, and to month 10 for the high case.

Take the MOQLowMiddleHigh
Unit-months, MOQ29,40026,10016,500
Unit-months, 600 at a time4,2004,5004,500
Extra carrying at $0.17$4,284$3,672$2,040
Units left at month 121,8001,2000
Write-off at $12.00$21,600$14,400$0
Total$25,884$18,072$2,040

The write-off is priced at the full unit cost to keep it simple. If you can clear expiring stock at some price, subtract what you recover.

The supplier quotes 600 units at $13.20 instead of $12.00, $1.20 more a unit (invented). With ordering 600 at a time, the brand only buys what sells: 1,200 units in 12 months at the low case (two orders), 1,800 at the middle (three), 3,000 at the high (five, over 10 months).

Pay to order 600 at a timeLowMiddleHigh
Premium at $1.20 a unit$1,440$2,160$3,600
Extra orders vs one MOQ order, at $150$150$300$600
Total$1,590$2,460$4,200

Now the answer depends on the case. If sales come in high, the MOQ is cheaper by $2,160. If they come in middle or low, the surcharge is cheaper by $15,612 or $24,294. The two bad outcomes are not the same size. Paying the surcharge and seeing high sales costs $2,160 more than it needed to. Taking the MOQ and seeing low sales costs $25,884.

Do not choose the option that wins if the forecast is right. Choose the one whose bad outcome you can afford.

Unless the brand is confident in the high case, the surcharge is the better buy. The cash side points the same way: $36,000 up front for the MOQ against $7,920 per 600-unit order.

And the split might beat both

Suppose the supplier makes the same base formula in three scents and agrees to let the 3,000-unit MOQ cover all three (invented). If the three sell 150, 100 and 50 a month at the middle case, combined demand is 300 a month and the 3,000 units last 10 months, inside the shelf life. The brand pays the MOQ price with nothing expiring at the middle case. Check each scent’s allocation as well: strong demand in one scent does not rescue excess stock in another. Split 1,500 / 1,000 / 500, each scent lasts 10 months here. The arithmetic is the same as above, run on the combined demand, and it is only an option if the supplier agrees, so ask before you sign the quote.

Things that change the answer

  • Price breaks. If the MOQ price is lower than your normal price, credit the saving to the MOQ column.
  • The first order for a new SKU. Demand cases are wider, so the low-case write-off is bigger.
  • Lead time. A long lead time can push you toward fewer, bigger shipments, which shrinks the gap between your normal order and the MOQ. Use the order size you would really place. The reorder point calculator gives the normal order its coverage.
  • Warehouse space. If the extra stock needs overflow space, use the overflow rate in step 2.

What to do this week, if a supplier quote is above your forecast

  1. Write down three demand cases for the SKU and divide the MOQ by each. Note any case that runs past the product’s shelf life, season or planned redesign.
  2. Set your carrying cost per unit per month: storage from your rate card, plus your own cost of cash.
  3. Build the month-by-month table for the MOQ against your normal order, and add up the extra cost.
  4. Ask the supplier three questions in writing: the price below the MOQ, whether the MOQ can be split across variants, and whether the run can ship in stages.
  5. Price each option at all three cases, and pick the one whose worst case you can afford.

Questions people ask

What should I do when a supplier’s MOQ is higher than my demand?

Price it before you negotiate. Divide the MOQ by your low, middle and high monthly demand to see how long it lasts, add up the carrying cost of the extra stock month by month against your normal order size, and add a write-off for anything that would expire or go out of season first. Then compare that with a below-MOQ surcharge, a split across variants, staggered delivery and waiting, each priced the same way.

Should I just order the MOQ?

Sometimes. In the first example above, a durable product with a modest premium for ordering less, the MOQ is cheaper at every demand case. In the second, a product with a 12-month shelf life, the MOQ is cheaper only if sales come in at the high case. Start from the order whose downside you can afford, then test it against the cost of running out.

How do I calculate the cost of holding extra inventory from an MOQ?

Set a carrying cost per unit per month (storage plus your cost of cash). For each month, take units on hand with the MOQ minus units on hand with your normal order, multiply by the carrying cost, and add the months up until both are sold. The total is the extra cost of the MOQ before any write-off.

Is it worth paying a surcharge to order below the MOQ?

It is worth it when the surcharge, plus the cost of placing more orders, is less than the extra carrying cost and write-off risk of the MOQ. In the two examples above, it paid off for the product with a shelf life and not for the durable one.

Can I negotiate a supplier’s minimum order quantity?

You can ask, in writing, for three things: a price for a smaller run, an MOQ that covers several of your SKUs sharing a material or tooling, and a full run shipped in stages. Price whatever the supplier offers against the MOQ before you accept.

How does shelf life change the MOQ decision?

It turns carrying cost into write-off risk. Find the month the stock stops being sellable, count how many MOQ units would still be on hand then at each demand case, and price them at unit cost minus anything you could recover. In the second example that write-off is $14,400 at the middle case, against $3,672 of carrying cost.

Every SKU, MOQ, price, supplier quote, demand case, carrying rate, per-order cost and shelf life in this article is an invented worked example, used so the arithmetic can be checked end to end. Your cost of cash and your write-off judgement are your own inputs. See SKU Compass plans and pricing, or book a strategy call.

Scroll to Top